PCS4001W導電銀漿蘇州普強導電涂料有限公司開發生產的一種慢干型熱固化銀漿；具有良好的絲印適性和低阻值性。
用途
廣泛應用于薄膜開關、電腦鍵盤、柔性線路板等領域。
特點
1.較強的導電性
2.極佳的附著力
3.優秀的撓曲性
4.良好的印刷性
技術數據
|
產品
性能指標 |
PCS4001 |
|
填料 |
銀粉 |
|
固體含量（Wt%） |
70±2% |
|
方阻(Ω/□) |
<12Ω/□ |
|
粘度
（Viscometer14#，20rpm,25℃ ） |
25~35Pa•S |
|
理論覆蓋面積（25um） |
5-7 m2／KG |
|
撓曲性（導線寬1mm，2公斤力×180°外折×1分鐘×5次以上) |
△R <2Ω |
|
附著力
（3M600膠帶×1分鐘，垂直拉） |
無脫落 |
|
硬度 |
>2H |
|
固化條件 |
140℃*40Min |
|
保質期 |
密封3個月 |
方法
1. PCS4001W是即用產品，無需稀釋?zhuān)蝗缧柘♂專瑧?yīng)使用我司專用稀釋劑DBE并攪拌均勻。
2. 銀漿使用應是已回復室溫。
3. 使用前請輕輕攪拌，速度不宜太快，防止?jié)B入空氣。
4. 建議使用200-300目不銹鋼絲網或聚脂絲網印刷。
5. 干燥溫度為150℃×50分鐘。
注意事項
1.使用時應保持通風良好，以避免過量蒸汽吸入體內。
2.如接觸到皮膚,應及時用清水和肥皂清洗。
3.銀漿的存放應擰緊瓶蓋，置于＜15℃室內陰涼處。
The electric conduction aluminum paste does not have the halogen series
PCS4001W conductive silver paste PuQiang (suzhou) conductive Paints Co.,LTD. Development and production of a slow-curing hot-dry silver paste; has a good screen printing and low adaptive value of.
Application
Widely applies in domains and so on thin film switch, computer keyboard, flexible line board.
Technical Data
|
Products
Property |
PCS4001 |
|
Filler |
Silver |
|
Solid Content (Wt%) |
70±2% |
|
Resistance(Ω/□) |
<12Ω/□ |
|
Viscosity（Viscometer14#，20rpm,25℃ ） |
25~35Pa•S |
|
Theoretical coverage（25um） |
5-7 m2／KG |
|
Deflection of（Wide wire1mm，2Kgf×180°Outside the fold×1Minutes×5TimesAbove) |
△R <2Ω |
|
Adhesion（3M600Tape×1Minutes，Vertical pull） |
No shedding |
|
Hardness |
>2H |
|
Curing conditions |
150℃*50Min |
|
Shelf-life |
Sealed 3 months |
Application M ethod
1.PCS4001 Products are used without dilution; For dilution, the Secretary should use my special diluent and mixing evenly DBE.
2.Silver has returned to use should be at room temperature.
3.Stir gently before use, speed should not be too fast, to prevent the infiltration of air.
4.Recommend the use of 200-300 head of stainless steel or polyester screen printing mesh.
5.Drying temperature of 150 ℃ × 50 minutes.
Notes
1. Use good ventilation should be maintained in order to avoid excessive steam inhaled.
2. Such as contact with the skin should be promptly cleaned with water and soap.
3. Silver storage cap should be tightened, placed <15 ℃ interior cool place.